How to care for your dryer

1. Replace white vinyl dryer vent tubing with aluminum tubing
Aluminum dryer vent tubing

Flexible white vinyl tubing is highly restrictive and does not meet U.S. federal fire safety standards.

2. Remove lint from the lint filter (a.k.a. lint trap or lint screen) after every cycle
Dryer lint filter

Yes, every cycle. It’s that important. Also, once per season, use a long-handle brush or vacuum attachment to remove lint from the filter’s chute, too.

3. Clear the dryer venting tube
Dryer vent tube

Your dryer’s entire venting system should be cleaned out from the inside of the dryer to the outside vent cap at least once per year. Professionals can be hired for this job but it’s usually a simple do-it-yourself job. Our bestselling 20-foot cleaning brush enables you to easily remove lint buildup from within the entire tube from the back of the dryer to the outside of your home.

4. Check the area around the dryer’s vent cap outside
Dryer vent cap

Remove restrictions such as snow or leaves and clear shrubbery to enable proper air flow.

5. Clean the dryer’s interior
Clean dryer interior

Even if you’re good about removing lint from the filter after every load, it’s common for lint to build up within the dryer, too. Once per year, disassemble the dryer and use a vacuum and a long vacuum hose attachment to clean out the lint.

Enter your dryer’s model number to find replacement filters designed for your model.

6. Pay attention to drying time
Lint Alert

If it’s taking longer for clothes to dry, it’s likely that lint is clogging the venting system and a thorough clean out should happen a.s.a.p.

Consider Lint Alert. It monitors for lint build-up and other blockage – alerting you if there is an air flow restriction in your dryer vent that could lead to a buildup of carbon monoxide in your home.

Dryer frequently asked questions

How long should it take for my clothes to dry?

Most dryers can dry a full load of laundry in fewer than 45 minutes. If the load is still damp, the venting system is likely clogged and you’ll need to clean it out as soon as possible.

Do I really need to clean out my dryer’s lint filter after every load?

Yes, air flow restriction is extremely dangerous. Clean it after each load.

How can I reduce my dryer’s energy consumption?

Don’t overload your dryer. Follow the owner’s manual for instructions on load sizes for your particular model. Clean out the lint filter after every load and once per year, clean out the entire venting system. Pay attention to drying times so that you’ll know when there is a problem.

What’s better – fabric softener sheets or liquid fabric softener?

We’ve found that liquid fabric softener does a noticeably better job softening fabric and reducing static cling. Additionally, softener sheets leave a residue that may clog the dryer’s lint filter screen. If this happens, you can remove the residue using a small amount of laundry detergent and a soft-bristle brush and a cotton ball doused with a small amount of rubbing alcohol. Make sure the filter is fully dry before returning to the filter chute.

Also, due to their stickiness, softener sheets have been known to find their way into the lint filter chute, within the dryer’s interior and within the vents –attracting lint and leading to buildup.

Is it important for my dryer to be level?

Yes. All appliances perform best when set up properly. If a dryer is not level, it can cause components to wear out prematurely.

Call (918) 488-1320

   *OPEN 7 DAYS*

dryer tips and advice