Call (918) 488-1320

   *OPEN 7 DAYS*

KITCHENAID
Range/Stove/Oven Fault Codes

Failure Code Condition Check/Repair
 
NOTE: Not valid for Y line. If there is a Y near the end of your model number, do not use this chart.

4 Digit Failure Code
 
F0 - E0 Analog to Digital Failure.
1.    Disconnect for 30 seconds.
2.    If display re-appears, replace control.
 
F1 - E1 Safety flip flop.
1.    Replace Electronic Range Control/Clock(ERC).
 
F2 - E0 Shorted keypad.
1.    Replace Electronic Range Control/Clock(ERC).
 
F3 - E0 Oven temperature sensor or sensor fuse opened.
1.    Replace oven temperature sensor or fuse.
 
F3 - E1 Oven temperature sensor shorted.
1.    Replace oven temperature sensor.
 
F3 - E2 Oven too hot.
1.    Replace oven temperature sensor.
 
F3 - E3 Clean temp too hot.
1.    Replace oven temperature sensor.
 
F5 - E0, F5 - E1 and E2 Check door/latch switch.
1.    Replace component.
 
2 Digit Failure Code
 
F0 or F1 or F5 Failed transistor.
1.    Replace Electronic Range Control/Clock(ERC).
 
F2 - E0 Oven temp too high.
1.  Test operation of door lock on self-clean models.
2.  Test relay contact operation.
3.  High resistance in oven temperature sensor.
 
F3 Open oven temperature sensor or thermal fuse.
1.   Replace oven temperature sensor or thermal fuse.
 
F4  Shorted oven temperature sensor.
1.   Replace oven temperature sensor.
 
F6 Problem in time keeping circuit.
1.  Reset time and/or cooking operation.
2. Check for proper ground.
 
F7 Stuck function switch or button on Electronic Range Control (ERC). 1.  Replace Electronic Range Control/Clock(ERC).
 
F8  Failure of Electronic Range Control (ERC).
1.   Replace Electronic Range Control/Clock(ERC).
 
F9  Door lock circuit.
1.   Check wiring.
2.   Test operation of door lock switch.

kitchenaid fault codes